- Native Minecraft Version:
- Legacy (< 1.13)
- Tested Minecraft Versions:
Custom JumpPads is a super smart JumpPads plugin featuring independent JumpPads. Each JumpPad is assigned its own power level, angle value, pressure plate type (or slime block) in-game, particle type, launch effect, and more which means there is almost no setup at all! Drag & Drop the plugin and start creating all the JumpPads you need!
This plugin is like no other JumpPad plugin as it features a precise arch-like flight trajectory:
The Redstone Block is there to show the precision of the JumpPads. It has no purpose regarding the actual functionality of the plugin.
Test Server: 22.214.171.124:25602
Aliases: [customjumppads, jumpp, cjp, jp]
- /jumppads create <power> [angle]
Create/edit a Jump Pad.
- /jumppads delete
Delete the Jump Pad you are looking at.
- /jumppads set <attribute> [value...]
Look at a JumpPad to set an attribute on it. Leave the [value...] blank to remove an attribute from the JumpPad. Hover over the command in the help menu to see attributes.
1.8 sounds. | 1.9+ sounds.
- /jumppads info
Get info about the Jump Pad you are looking at.
- /jumppads list [page]
Show a list of all configured jumppads. Click on any entry to teleport to it.
- /jumppads reload
Reload the configuration files.
Shoutout to @Quadbamber who was kind enough to create a plugin preview/review.
The plugin showed in the video is version 1.8.6.
Default Config Files:
# ___ _ _ ___ _____ ___ __ __ _ _ _ __ __ ___ ___ _ ___ ___
# / __| | | / __|_ _/ _ \| \/ | _ | | | | | \/ | _ \ | _ \/_\ | \/ __|
# | (__| |_| \__ \ | || (_) | |\/| | | || | |_| | |\/| | _/ | _/ _ \| |) \__ \
# \___|\___/|___/ |_| \___/|_| |_| \__/ \___/|_| |_|_| |_|/_/ \_\___/|___/
# By: Benz56
# Max power:
# - Power = 50 will launch you approximately 110 blocks.
# Launch direction:
# true: launched in the direction the player is walking.
# false: launched in the direction the player is looking.
# Trail color when launched from JumpPad:
# - Every Minecraft color is Valid (names(e.g. red) and color codes (e.g &c):
# - Colors: http://imgur.com/a/v3TzU
# - Trail density = number of particles per block. Higher values = more distance between particles
# - A density of 1 (lowest) is recommended for best visual appeal.
# Jumppads launch sound:
# - Make sure the default sound is supported in your version.
# Should living entities (cows, pigs, villagers etc) get launched also?
# Visualizer settings:
# The visualizer creates a hovering rotating circle of particles above all JumpPads.
# Enable or Disable the visualizer.
# Set which type of particles should appear.
# Set the color of the rotating particles.
# Colorizeable particle types: REDSTONE, SPELL_MOB and SPELL_MOB_AMBIENT.
# The max distance the visualizer is visible to the player.
# The radius of the rotating circle.
# The speed in which the circle rotates. Lower is faster. Minimum is 1.
# Enable launch effect:
# Choose an effect to be played here: https://hub.spigotmc.org/javadocs/spigot/org/bukkit/Effect.html
# Set the duration/data of the effect played.
# Update Checker Settings.
# Enable or disable the update checker.
# false: All OPs are notified of a new update when they join.
# true: OPs are only notified if they have the jumppads.update permission as well.
# N.B. any user with the jumppads.update permission is notified; OP or not.
updateCheckerPermissionOnly: falseCode (YAML):# This is the Message file for all Custom Jumppads messages.
# All messages are fully customizable and support color codes, formatting and ASCII symbols.
# Set the Prefix and use %prefix% to add the corresponding prefix to a message.
# Leave a message blank ('') to disable it.
# You can also create messages with Hover and Click events. Syntax options: (Space between comma and quote is NOT allowed)
# - ["Message","/Command"]
# - ["Message","Hover"]
# - ["Message","/Command","Hover"]
# - ["Message","/Command","Suggest"]
# - ["Message","/Command","Hover","Suggest"]
# You can add as many events to a message as you want. Example:
# '%prefix% &cInvalid arguments! ["&c&n&oHelp","/jumppads help","&aClick to get help!"]'
# The "Suggest" tag is used if the click event should suggest the command. Default is Run.
Prefix: '&7[&eJump Pads&7]'
PlayerOnly: '%prefix% &cCommand can only be used as a Player!'
InvalidPermission: '%prefix% &cYou do not have permission to do this!'
InvalidArguments: '%prefix% &cInvalid arguments! ["&c&n&oHelp","/jumppads help","&aClick to get help!"]'
InvalidTarget: '%prefix% &cJumppads can only be created on pressure plates and slime blocks!'
InvalidPower: '%prefix% &cYou do not have permission to set <power> above %maxPower%!'
ConfigurationsReloaded: '%prefix% &aConfiguration files successfully reloaded!'
Created: '%prefix% &aJumppad created!'
Deleted: '%prefix% &aJumppad deleted!'
NotAJumppad: '%prefix% &cThe targeted block is not a jumppad!'
InvalidAttribute: '%prefix% &cInvalid Attribute!'
AddedAttribute: '%prefix% &aThe attribute value has been set.'
RemovedAttribute: '%prefix% &aAttribute removed. Using default if any.'
NotSupported: '%prefix% &aNot supported in this version.'
UnsafeTeleport: '%prefix% &cThere is no safe destination at the jumppad!'
- Auto deletes JumpPads if broken.
- WorldEdit support! Checks for JumpPads removed incorrectly on /reload, /restart and stop -> start.
- Realistic flight trajectory.
- Create and Edit JumpPads in-game! No configuration needed.
- Choose between all types of pressure plates. Slime blocks are also supported.
- Fall-damage is ignored for players!
- Various clickable JSON messages.
- Particle Trails.
- Automatic permission based tab completer.
- Living entities like pigs and cows are launched if enabled.
- JumpPad visualizer (1.11 and up only):
- Default JumpPad launch effect:
Permission to use the help command.
Permission to create JumpPads.
Permission to delete/break JumpPads.
Permission to use the set command.
Permission to use JumpPads.
Permission to reload plugin configuration.
Permission to create JumpPads exceeding max power.
Permission to use the info command.
Permission to use the list command.
Permission to click teleport to jumppad in the list.
Permission to be notified of new updates.
1. Put JumpPads.jar inside your plugins folder.
2. Start or reload your server.
3. Optional. Edit the generated config.yml to your liking.
Currently, 1.8 - 1.14 is supported, though features are limited in the following versions: 1.8, 1.9 & 1.10. Recommended versions are 1.11 and upwards.
Please leave a rating and a comment below!
Found a bug? Please let me know in the discussion section and I'll take care of it.
Custom Jumppads | [1.8 - 1.14] 1.22.11
A Jumppad-plugin like no other! Featuring realistic arch-like flight!