Spigot Custom Structures 1.4.2.1

Generate Structures from schematics. [1.13.2-1.14.4]

  1. When spawning a schematic will it have a base of air around it or will it just place the build into the world and replace air in the build with, for example, the ground?
     
  2. It depends how you saveed the schematic.
     
  3. Total B.A. plugin man. Works perfectly and as expected.
     
  4. thanks. I didn't think that would be considered a large structure, it's just a small witch hut. other schematics in use are much larger than that one. It's just more about understanding how to place them in... like I get using y=whatever and using -1 is ground level. Can -2,-3,-4 etc etc be usedto sink it below ground level by a few blocks?
     
  5. Not currently but that is a good idea.
     
  6. ryandw11 updated Custom Structures with a new update entry:

    1.3 Update

    Read the rest of this update entry...
     
  7. Can you add when structure will be shown on map?
     
  8. It should be shown by default if it is big enough. Minecraft should update maps on it’s own.
     
  9. Can someone tell me how to use this properly? Whenever I change the things to correct schematic it says ERROR: The schematic file for this does not exist! Can someone help?
     
  10. For specific biomes and not all, what would be the argument to follow in 'biome:'?
     
  11. That means the file you put in your config does not exist. Can I see your config.yml?
     
    • Like Like x 1
  12. Does this really work? Any limits? Willing to give it a try!
     
  13. How do i edit each one like the settings for them spawn rate and stuff
     
  14. It isnt working...
    [17:01:00 ERROR]: [CustomStructures] Error: The schematic dropship.schematic does not exist in the config! [17:01:00 ERROR]: [CustomStructures] For assistance please contact Ryandw11 on spigot. [17:01:00 ERROR]: [CustomStructures] The plugin will now disable it self. [17:01:00 INFO]: [CustomStructures] Disabling CustomStructures v1.3.1 [17:01:00 ERROR]: [CustomStructures] Error: The schematic file for dropship.schematic does not exist! [17:01:00 ERROR]: [CustomStructures] For assistance please contact Ryandw11 on spigot. [17:01:00 ERROR]: [CustomStructures] The plugin will now disable it self.

    Config is


    configversion: 1
    #========================================
    # Custom Structures
    #========================================
    #Wiki: https://github.com/ryandw11/CustomStructures/wiki
    Schematics:

    #A list containing all of the schematics.
    #When you add a new schematic add it to this list.
    List:
    - dropship.schematic
    - shulker-dungeon.schematic
    - bat-spawner.schematic
    - Island_1.schematic
    #Change the name bellow with what you want. (Note: change the name in the list too!)
    demo:
    #The schematic file. Make sure to include the .schematic
    Schematic: 'demo.schematic'
    #What biome this a schematic can spawn in. Change to all for all.
    Biome: 'all'
    #The chance option
    Chance:
    #The number that can be picked out of 1000. So if 1 is picked than it spawns.
    Number: 1
    #The number that the ratio is out off.
    OutOf: 1000
    #If the structure can spawn in all worlds.
    AllWorlds: true
    #The y cord the structure will spawn on. Use -1 if you want it to be on the surface.
    SpawnY: -1
    #If the above is false then the worlds it can spawn in:
    AllowedWorlds:
    - world
     
  15. First of all you want to remove the .schematic from all of the items in the List. Then you need to add the schematic. The demo: is just an example. I fixed your config below. It may not be setup how you want it so you may need to change some things. I hope I managed to help.

    Code (YAML):
    configversion: 1
    #========================================
    #             Custom Structures
    #========================================
    #Wiki: https://github.com/ryandw11/CustomStructures/wiki
    Schematics
    :

    #A list containing all of the schematics.
    #When you add a new schematic add it to this list.
        List
    :
           - dropship
           - shulker-dungeon
           - bat-spawner
           - Island_1
        #Change the name bellow with what you want. (Note: change the name in the list too!)
        dropship
    :
           #The schematic file. Make sure to include the .schematic
            Schematic
    : 'dropship.schematic'
            #What biome this a schematic can spawn in. Change to all for all.
            Biome
    : 'all'
            #The chance option
            Chance
    :
               #The number that can be picked out of 1000. So if 1 is picked than it spawns.
                Number
    : 1
                #The number that the ratio is out off.
                OutOf
    : 1000
            #If the structure can spawn in all worlds.
            AllWorlds
    : true
            #The y cord the structure will spawn on. Use -1 if you want it to be on the surface.
            SpawnY
    : -1
            #If the above is false then the worlds it can spawn in:
            AllowedWorlds
    :
               - world
        shulker-dungeon
    :
           #The schematic file. Make sure to include the .schematic
            Schematic
    : 'shulker-dungeon.schematic'
            #What biome this a schematic can spawn in. Change to all for all.
            Biome
    : 'all'
            #The chance option
            Chance
    :
               #The number that can be picked out of 1000. So if 1 is picked than it spawns.
                Number
    : 1
                #The number that the ratio is out off.
                OutOf
    : 1000
            #If the structure can spawn in all worlds.
            AllWorlds
    : true
            #The y cord the structure will spawn on. Use -1 if you want it to be on the surface.
            SpawnY
    : -1
            #If the above is false then the worlds it can spawn in:
            AllowedWorlds
    :
               - world
        bat-spawner
    :
           #The schematic file. Make sure to include the .schematic
            Schematic
    : 'bat-spawner.schematic'
            #What biome this a schematic can spawn in. Change to all for all.
            Biome
    : 'all'
            #The chance option
            Chance
    :
               #The number that can be picked out of 1000. So if 1 is picked than it spawns.
                Number
    : 1
                #The number that the ratio is out off.
                OutOf
    : 1000
            #If the structure can spawn in all worlds.
            AllWorlds
    : true
            #The y cord the structure will spawn on. Use -1 if you want it to be on the surface.
            SpawnY
    : -1
            #If the above is false then the worlds it can spawn in:
            AllowedWorlds
    :
               - world
        Island_1
    :
           #The schematic file. Make sure to include the .schematic
            Schematic
    : 'Island_1.schematic'
            #What biome this a schematic can spawn in. Change to all for all.
            Biome
    : 'all'
            #The chance option
            Chance
    :
               #The number that can be picked out of 1000. So if 1 is picked than it spawns.
                Number
    : 1
                #The number that the ratio is out off.
                OutOf
    : 1000
            #If the structure can spawn in all worlds.
            AllWorlds
    : true
            #The y cord the structure will spawn on. Use -1 if you want it to be on the surface.
            SpawnY
    : -1
            #If the above is false then the worlds it can spawn in:
            AllowedWorlds
    :
               - world
     
     
  16. kk, i'll give it a try!