How to create schematics for walls

CraftOfClans - How to create schematics for walls

Every village has walls around it and they are generated during the creation process.
The walls are composed of two schematics that are replicated and adapted for each side.

The two schematics are:

• WALL_CORNER.schematic
• WALL.schematic

WALL_CORNER is the schematic that is replicated in the 4 corners
WALL is the schematic that is replicated in each side

You can change the name of schematics by editing the options wall-schematic and wall-corner-schematic

Both schematics must be 16x16 max size.

Create the corner schematic

To start I suggest to use a flat world and highlight any chunk to be used (16x16), for example changing the floor (which must not be copied during saving).

Then start creating the structure and keep in mind that the walls will have to fit on each corner.
Once finished, select the two points with WorldEdit as in the image (orange blocks), and then do not copy the floor.
Orange blocks are placed in the ends of the chunk (edges of the chunk)

Save the schematic as WALL_CORNER and upload the .schematic file into the CraftOfClans/schematics folder.



Create the curtain wall

To start I suggest to use a flat world and highlight any chunk to be used (16x16), for example changing the floor (which must not be copied during saving).

Start creating the structure and keep in mind that the walls will have to fit together.
Once finished, select the two points with WorldEdit as in the image (orange blocks with red border), and then do not copy the floor.
Orange blocks are placed in the ends of the chunk (edges of the chunk)

Save the schematic as WALL and upload the .schematic file into the CraftOfClans/schematics folder.